Multi-function Hydraulic Iron Worker, Combination of Punching and Shearing Machine

It used for cutting and punching of various kinds of sections, such as sheet, square, steel, channel steel, Angle steel, and steel, etc., which are the preferred machine tools for large quantities of various kinds of steel.It can bend the plate of the plate below 500mm.Each part of the machine meets the highest quality requirements in terms of safety, function, maintenance and performance.

1. Punch area

1) various punch dies are available to cater for different needs.

2) quick disassemble of the clamping system can greatly save time and maintain its precision.

3) specially designed stripping plate, good perspective, safe design, easy to punch work.

4) the flapper baffle is suitable for punching holes of various sizes.

5) two working boards, with a ruler and a positioning block for easy operation.

2. Plate shear workspace

1) the special curve is designed with a knife plate to minimize the distortion of shear parts.

2) the lower blade board has four shear blade surface replaceable.

3) with the support platform of the positioning board, it is easy to adjust to the operation.

4) it can be used to connect the edges of the Angle iron.

5) it is easy to adjust and see the shear line.

3. Round steel. Square steel shear work area

1) the same pressure plate can be used for the shear of round steel and square steel.

4. Angle cutting area

1) single blade shear, no loss of material, small deformation.

2) 45/90 degree docking shear is easy, beautiful and practical.

3) blade design can be designed with four sides of blade, economical and economical.

5. Cut corners

1) the ideal of the plate, the Angle iron and so on, is convenient for the joint shear Angle work.

2) the safety cover of the electronic lock is safe and good.

3) a worktable with positioning block. It is easy to locate precise machining.